Ph.D. Degree.

• Park, Jin Yong (Ph.D., 2001), Assistant Professor, Indiana Institute of Technology.
  Research Topic: Shear Strength of Pultruded Materials and Structures.
• Kang, Jin Ook (Ph.D., 2001).
  Research Topic: Fiber-Reinforced Polymeric Pultruded Members Subjected to Sustained Loads.
• Linzell, Dan (Ph.D. 1999), Assistant Professor, Pennsylvania State University.
  Research Topic: Full-Scale Tests on Horizontally Curved Non-Symmetric Steel I-Girders Under Transverse Loading, Co-advisor: R. Leon.
• Zhang, Shu (Ph.D., 2000), Senior Structural Engineer
  Research Topic: Lateral-Torsional Buckling of Simply Supported Cantilevered Fiber-Reinforced Polymeric Beams.
• Acosta, Felipe, Assistant Professor, University of Puerto Rico, Mayaguez
  Research Topic: Experimental Characterization of the Mechanical and Structural Properties of Fiber-Reinforced Polymeric Bridge Deck Componants.
• Cho, Baik-Soon (Ph.D, 1999), Assistant Professor, InJee Univesrity, Korea
  Research Topic: Shear Properties of Fiber-Reinforced Polymeric Materials.
• Steffen, Robert (Ph.D., 1998), Assistant Professor, University of New.
  Research Topic: Behavior and Design of Fiber- Reinforced Polymeric Composite Equal-Leg Angles.
• Kim, Yoonso (Ph.D., 1998).
  Research Topic: Three-Dimensional Elasticity Solutions for Buckling of Thick Specially Orthotropic Cylindrical Shells Under Torsion, Co-advisor: G. Kardomateas.
• Stoddard, William (Ph.D., 1997).
  Research Topic: Lateral-Torsional Buckling of hybrid and no-hybrid Polymer Composite Members under Transverse Loading.
• Sridharan, Srinivasa (Ph.D., 1997), Processing Engineer, Allied Signal, Inc., New Jersey.
  Research Topic: Environmental Durability of E-glass Vinlester Pultruded Materials, The student is officially in the School of Chemical Engineering, Co-Advisor with J. Muzzy.
• Scott, David (Ph.D., 1997), Assistant Professor, Georgia Institute of Technology Regional Program.
  Research Topic: Short- and Long-Term Behavior of Fiber-Reinforced Polymeric Slender Members under Compression.
• Shih, Ban-Jwu (Ph.D. 1994), Associate Professor, National Taipei Institute of Technology, Taiwan.
  Research Topic: Local Buckling of Fiber-Reinforced Polymeric Structural Members Under Linearly-Varying Edge Loading.
• Al-Shaleh, Khaled Saad (Ph.D. 1994) Assistant Professor, Kuwait University, Kuwait.
  Research Topic: Optimum Design of Straight Steel Box Girder Bridges.
• Yoon, Soon-Jong (Ph.D. 1993), Assistant Professor, Hongik University, Korea.
  Research Topic: Behavior of Locally Buckled I-shape Pultruded Columns.
• Naqib, Rami (PhD 1992), Research Engineer, Georgia Tech.
  Research Topic: Shape Optimization of Two-Dimensional Elastic Continuum Using Finite Element Analysis, Co-advisor: K.M. Will, School of Civil and Environmental Engineering.

MSCE Degree

• Butz, Travis (M.S. 1997)
  Research Topic: Tests on Eccentrically Loaded Pultruded Tubular Member.
• Derain, Fabienne (M.S. 1994 )
  Research Topic: Tests on Pultruded Composite Single Angle Compression Struts
• Bandy, Brent J. (M.S. 1992)
  Research Topic Flexural Behavior of a Deep Wide-Flange FRP Pultruded Beam. Co-advisor: L. Kahn of the School of Civil and Environmental Engineering.
• Scott, David Edward (M.S. 1992)
  Research Topic: Characterization of Fibrillated Polypropylene and recycled Waste Fiber Reinforced Concrete.
• Garrison, James C.,III (MSCE 1991)
  Research Topic: Static and Dynamic Analysis of Horizontally Curved Box Girder Bridges: State-Of-The-Art
• Pfeiffer, David R. (MSCE 1991)
  Research Topic: Tabular Decision Logic for LRFD Steel Analysis and Design of members subjected to Flexure and Shrear.
• Vakiener, Adam (M.S. 1990)
  Research Topic: Preliminary Investigation of Flange Local Buckling in Pultruded Wide-Flange Structural Shapes.
• Dai, Yan (MSCE 1989)
  Research Topic: The application of Composite Materials in Construction
• Grand, Sara Ellen McDonald Grand (MSCE 1988)
  Research Topic: An examination of Different Plate Girder Design Criteria
• Patel, Bakulesh M. (MSCE 1988)
  Research Topic: Optimum Design of Steel Gable Frames by LRFD Criteria
• McCall, James E., Jr. (MSCE 1987)
  Research Topic: Transversely Isotropic Medium with Rigid Spheroidal Anchor Under Asymmetric Pull
• Planner, Michael B. (MSCE 1987)
  Research Topic: The Optimum Design of Plate Griders using LRFD Criteria
• Shurbajji, Munib B. (MSCE 1987)
  Research Topic: Optimum Design of Plate Griders.
• Thornton, William A, III (MSCE 1987)
  Research Topic: Optimum Design of Cold-Formed Axially Loaded Members in Electrical Transmission Towers.
• Williams, David Kohler (MSCE 1987)
  Research Topic: Microcomputer Analysis and Design of Cylindrical Steel S Silos

 

B.S Degree

• Seth Safra: (present)
  He is being trained in the area of experimental structural engineering.
• David Domyslawski: (present)
  His work involves composite material testing.
• Heather Paseur: (BS 1997)
  Her research work involved moisture absorption of phenolic and vinylester based pultruded materials.
• Brian Stoddard: (BS 1997)
  His research work involved testing of pultruded box beams.
• Sean Fairweather: (BS 1996)
  Research Topic: Web Crushing Limit State for Pultruded I-Beams.
• Mark Tribble: (BS 1996)
  His research work involved the characterization of phenolic pultruded composites.